Linear Grid Ceiling Systems

Linear grid systems offer design flexibility and are generally designed and manufactured to the building planning grid.

Linear systems are constructed using SAS System 330 and supported with either C- or C-Omega profiles. The profiles support the tiles at 90° creating a linear appearance.

Profiles are available in standard widths of 50mm to 300mm, with alternative sizes and tapering profiles available to order.

Tiles can be removed from the profile grid to allow large unobstructed runs to the ceiling void to be created. During installation, profiles and aperture tiles can be installed earlier in the programme leaving the soffit and ceiling void open for mechanical and electrical service installation.

The balance of field tiles can be delivered and installed towards the completion of the project and services are connected.

Linear tiles are supplied with end arm brackets, these support the tile vertically from the linear profile when accessing the ceiling void. This avoids the requirement for temporary storage and any potential damage.

C-profiles offer a plain flush finish while Omega profiles offer a continuous M6 thread form for the easy location and relocation of partitioning heads, see System 330.

Linear grid systems are installed within plasterboard ceilings to provide service access points.