System 130

Modular Lay-In Tiles (Exposed Grid)

description
grid options
acoustic data
features
project gallery

System Description

SAS System 130 is a range of lay-in tiles supported from SAS Alugrid or SAS Tee Grid. Alugrid-Q features a continuous lineal recess with an M6 thread and negative quirk relief detail abutting the ceiling tiles, giving a completely flush ceiling. Alugrid-P is a plain version without the threaded recess and gives a completely flush ceiling. Tee Grid is a butt cut exposed grid that provides a tegular effect.

System Features

Easy access to the ceiling void
Minimum 25-year product life expectancy

System Features with SAS Alugrid

Shadow line feature between grid and tile
Precise mitred joints
Continuous threaded feature recess
Clean flush ceiling plane

System Features with SAS Tee Grid

Strong modular appearance
Butt cut junctions eliminating corner shadows

Access

Tiles can be lifted out of the ceiling system to gain access to the ceiling void.

Standard Module Sizes (mm)

500x500 600x600 750x750

Special sizes are available on request. Please contact for our technical department further details.
600 x 600mm tiles can be supplied for use with SAS Tee Grid or tartan grid configurations.

Finish

Polyester Powder coated, supplied as standard with a RAL 9010 smooth finish, a fine textured finish (SAS FT), antibacterial coating (SAS AB) is available. See Paint Finish for a full range of options.

Grid System

Lay-in SAS Alugrid-Q, SAS Alugrid-P, SAS Tee Grid, see System 130 components.

Shape

Tiles are square with out-turned flanges laid onto the exposed grid system.

Perforation

Typically supplied with 1522, 1820 or 2516 perforation. See perforations for full details and perforation options.

Integration

Apertures can be formed during manufacuturing for luminaires and other services, see integration for further details.

Weight

Approximately 5kg/m² for 8mm steel tiles, acoustic/ insulation pad and SAS Tee Grid. Approximately 7.5kg/m² for 16mm steel tiles, acoustic pad and SAS Alugrid suspension.

Isometric Drawing

Section Drawing

System 130 Grid Options

SAS Alugrid-Q 15/08

SAS Alugrid-Q 15/16

SAS Alugrid-Q 15/19

SAS Alugrid-Q 25/16

SAS Alugrid-P 15/08

SAS Alugrid-P 15/16

SAS Alugrid-P Cleanseal

SAS Tee Grid T15

SAS Tee Grid T24

Acoustic Performance Data

	Attenuation	Absorption
	dB	Class
		NRC	αω
8mm, 16mm, 19mm, plain tile.	43	N/A
8mm, 16mm, 19mm perforated tile with acoustic fleece.	13	Class C
		0.70	0.65
8mm, perforated tile with 8mm x 80kg/m³ acoustic pad, factory sealed.	21	Class C
		0.80	0.75
16mm perforated tile with 16mm x 80kg/m³ acoustic pad, factory sealed.	27	Class B
		0.85	0.85
16mm perforated tile with 16mm x 80kg/m³ acoustic pad and steel backing plate.	41	Class D
		0.65	0.50
19mm perforated tile with 19mm x 80kg/m³ acoustic pad, factory sealed.	30	Class A
		0.85	0.90
19mm perforated tile with 6mm x 80kg/m³ acoustic pad and 12.5mm plasterboard.	45	ClassD
		0.65	0.55

Alugrid-Q Composition and Integration The Alugrid-Q cross tee comprises of a steel carrier for retention of structural integrity in fire conditions. The aluminium thread form profile features a continuous lineal recess with an M6 threadform and a negative quirk rebate. This facilitates the hanging of signs and other lightweight fixtures by means of an M6 bolt.

Alugrid-Q Junction Detail The aluminium cross tee extrusions are machined to create precise mitred "bird's mouth" intersections on the grid face. Alugrid-Q sections can be supplied with "bird's mouth" mitres on one side only to fit a flush abutment toluminaires, air grills and other services which rest directly on the grid but are of a larger modular size than the ceiling tiles. The continuous linear threadform allows the easy location and relocation of partition heads by means of an M6 bolt, without causing damage to the ceiling tiles.

Partition Head Fixing Detail To maintain the acoustic attenuation performance a gasket should be inserted by the partitioning contractor in the threaded recess across the width of the partition head.

Project Gallery


						Broadgate Towers, Bishopgate The flagship Reed Smith offices in Broadgate Tower, London, feature bespoke ceiling systems finished in three different shades of red. > Full Details

		City Academy, Bristol Feilden Clegg Bradley's work on the design included SAS metal clip-in modular tiles. > Full Details				Chevron House, Aberdeen SAS International's 130 metal ceiling solution complemented the clean lines of the interior of this corporate development. > Full Details

		Cardinal Place, London EPR Architects specified SAS System 130 suspended metal ceilings throughout the Land Securities office development. > Full Details				Chesham House, Regent Street, London Making up part of the Regent Street crescent Squire and Partners specified SAS System 130. > Full Details

		Ashburton Learning Village, Croydon Architects Penoyre & Prasad LLP specified SAS metal ceiling tiles for all classrooms, offices and circulation areas. > Full Details				Gala Casino, Bristol In Haus Solutions specified SAS ceilings as they provided a clean-cut, contemporary look, and could be produced in a number of different colours. > Full Details

		Mini Showrooms, Nationwide Black reflective metal ceilings from SAS installed Mini showrooms nationwide to create an ‘iconic’ look. > Full Details